| |
right spot. Pulling back on the plunger will
create a vacuum in your syringe. The oil cannot expand to fill that space,
but any air bubbles in your syringe will. You may notice the tiny bubbles
getting bigger and bigger as you pull back. They will return to normal
size as you release the plunger. If the air bubbles do not disappear upon
releasing the plunger, you have an air leak most likely caused by the
needle not being screwed onto the syringe tightly enough, although on very
rare occasions, the syringe or needle itself can be defective. Either way,
purge the air bubbles out, put a new needle on and try it again.
Do I really need to
aspirate? Those who inject without aspirating are taking
unnecessary chances. Sweating, nausea, dizziness, severe coughing,
breathing difficulties, anaphylactic shock, coma or death can all result
from not aspirating. Most of the time, steroid users experience dizziness
and coughing fits when they inject into a blood vessel. But you need to be
aware of the dangers of neglecting this simple technique that should take
about 3-5 seconds of your time.
|